OEM Loudspeaker Assembly for Sony Xperia Z1

OEM Loudspeaker Assembly for Sony Xperia Z1 Description:

With loudspeaker assembly inside of Xperia Z1, you can play the music out, watch videos without headphones, get to know there come the calls and messages though hearing the ringtone, and hear the sound from the other side of the call even don't have to put the phone near the ear. If you are encountered by Xperia Z1 no sounds or rear speaker had noise, you can get this original loudspeaker replacement for Xperia Z1 to change.

This ringer for Xperia Z1 comes with two logic board which can connect the RF flex cables on both sides to ensure the signal for whole device. As for the rubber seal, give a hand for the waterproof function and fixed the loudspeaker at the same time.

Here we provide the detailed guide for replacing loudspeaker for Xperia Z1.

Step 1. Remove the back cover.

Heat up the edges of the back cover by using heat gun or blow dryer to melt the adhesive sticker, and then open it with a spudger tool and guitar picks.

Step 2. Remove the back cover supporting frame.

Unscrew the screws on the back cover supporting frame by Hexagonal Screwdriver and release the connector of microphone flex cable as below.

Heat up the edges in the same way for melting adhesive. There are some hidden keys. So you need a guitar pick to pry the back cover supporting frame up.

Step 3. Remove loudspeaker.

It is easy to pry up the battery because there is no any adhesive. And then release the two RF flex connectors that connect the two small logic boards. At last, using a tweezers to pry up the loudspeaker and remove it successfully.

Tips: New back cover adhesive and back frame adhesive will be needed when replace.

OEM Loudspeaker Assembly for Sony Xperia Z1 Specification:

-Compatible with: Sony Xperia Z1

Package Content:

1 x OEM Loudspeaker Assembly for Sony Xperia Z1

Packing Details:

-Weight: 0.0036KG

-Packing Size: 6.8x1.5x0.3 (CM)

-Estimated Shipping Weight: 0.014KG